How to Clean Your Showerheads

If the water from your showerhead is shooting out in all directions, or your flow has become almost nonexistent, the holes in your showerhead are probably clogged with minerals. At EH Clean, we often encounter dirty and grimy showerheads, so here is a simple way to do the job right.

1. Wipe as much of the dry debris from the holes in the showerhead as you can with a scrubber sponge. 
2. Still not spraying straight? Mix a solution of equal parts white vinegar and water (you'll need about 1 cup), and pour it into a plastic bag. 
3. Put the plastic bag around the showerhead so the holes are immersed in the liquid, and secure the bag to the shaft with a twist tie. 
4. Allow it to soak at least 15 to 20 minutes (up to an hour if you can). 
5. Remove the bag and wipe away loosened deposits. Run the shower on hot to flush and you're all set.

About EH Clean

At EH Clean, our motto is "We don't cut corners, we clean them!" By stressing a quality, tailor-made cleaning service for all of our clients who demand the best, we have been able to build a strong and thriving business. We are owner operated and during the past 20 years we have gained a vast amount of knowledge, understanding and experience within all aspects of cleaning and it shows in our work. 

Sources: Good Housekeeping, Wikipedia

Post Info:

Published on:
10/15/2018

Post by:
Admin

Category:
Cleaning Tips 

Back